Cookie Img
Home » Products » Textile Chemicals » Printex Elasto White & Clear

Printex Elasto White & Clear

Printex Elasto White & Clear
Printex Elasto White & Clear
Product Code : 24
Product Description

Printex Elasto White & Clear

  • Chemical structure: Aqueous dispersion of titanium dioxide, anionic synthetic resins and synthetic thickeners
  • Appearance: thick, white / clear paste: pH: 7.5 - 8
  • Viscosity: 25.000-30.000 maps measured with Hake’s rotational viscometer
  • Storage: It can be stored for 6 months in a closed pot on a temperature between +5 and +20 oC. Pprotect from heat radiation and freezing.


Printex ELASTO WHITE/ CLEARis an environment-friendly, highly opaque screen printing ink, which produces very elastic prints. It does not dry into the screen even in case of prints, which need intermediate drying and are printed with automatic carrousels in big quantities. It can be used both as an under layer and as flash white. It can be colored with regular water-based pigments to pastel shades (we recommend to add max 5% pigments).


Printex ELASTO WHITE / CLEAR can be diluted with water. We can improve the rubbing- and the wash fastness by adding Fairer FF formaldehyde-free cross linker, but by adding cross linker, the elasticity of the print will be worse.

Recommended mesh: - Polyester- Monofilament from 32 to 68

Curing of the print: - In heating tunnel on 160 C 3 minutes

If you add catalizer (e.g. Catalizer SV2), the curing temperature can be lower. In case of curing on too low temperature the print will remain sticky. In this case the additives, which influence the drying of the ink do not disappear at the curing. Besides the rough touch there can be also problems with the wash fastness. In this case the prints have to be cured on higher temperature. The prints with incomplete curing can be improved with repeated curing.

Storage:- To be stored closed, protected from freezing. Shelf life: 6 months.

In case of longer storage, mix extensively.


Please, make a test print before every series of prints. Make sure that the appropriate actuality values can be achieved with the actual base material and with Your technological conditions.

Shreeji INC.

Corporate Address :

"Shri Vibhu" 9, Lajya Silk Mill Compound,
Shiv Sagar Hotel Gali, Mogra Lane,
Off. Old Nagardas Road, Andheri (East), Mumbai, India

RAS SIDDHI All Rights Reserved.