Cookie Img
  
Home » Products » Textile Chemicals » Rasadischarge White & Clear Paste

Rasadischarge White & Clear Paste

Rasadischarge White & Clear Paste
Rasadischarge White & Clear Paste
Product Code : 23
Product Description

Rasadischarge White & Clear Paste

Water-based White / CLEAR printing paste

Chemical structure: Aqueous emulsion of acrylic polymer and titanium dioxide

Appearance: medium viscosity , white / CLEAR paste

pH: 7.5 - 9

Viscosity: 25.000-25.000 mPas measured with Haake’s rotational viscometer

Storage: It can be stored in a closed pot.

Protect from heat radiation and freezing.

Application:

RASA Discharge is improved formost opaque printings.If you want extra white , add maximum

% 10 our White Pigment

Rasalogical Activator

It is a reducing agent that discharge in printing the Cellulosic dischargeable cotton garments and colored garments. Appearance is white crstalyse powder. After printing it forms ecologic finish. Store in closed package. Keep from moisture and other chemicals. Use gloves and be careful about safety information.

Put 70gms Activator into discharging paste and mix wait 20 minutes to dissolve powder and mix again. Check dissolving by your hands. Using life of prepared paste is 4-4.5 hours. After this time don’t use this ink, prepare new mixture.

Usage:

You can mix with transparent discharge base for medium shades and softer handle.

Recommended Recipe:

Rasadischarge White/ CLEAR: 930 gr

Activator : 70 gr

Total: 1000 gr

Recommended mesh: Polyester-Monofilament all numbers that use for water based printing

Thinning: If it needs you can thin with small amount of water

Curing of the print In heating chamber: on 170-180 oC 3 minutes

Medium drying is not recommended during printing. Working below these temperatures causes insufficient discharge on ground and binding of pigment on garment will not be enough there will be problem on washing-rubbing fastnesses. If you can not form curing conditions you can add Printex Fairer or Printex Catalizer SV2 on with suitable rate and improve fastness results.

Storage

To be stored closed, protected from freezing. Shelf life: 6 months.

In case of longer storage, mix extensively.

Note

Please, make a test print before every series of prints. Make sure that the appropriate actuality values can be achieved with the actual base material and with Your technological conditions.


Shreeji INC.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Corporate Address :

"Shri Vibhu" 9, Lajya Silk Mill Compound,
Shiv Sagar Hotel Gali, Mogra Lane,
Off. Old Nagardas Road, Andheri (East), Mumbai, India

RAS SIDDHI All Rights Reserved.